What are the correct maintenance methods of vacuum emulsifying machine

vacuum emulsifying machineIt is mainly composed of pre-disposal pot, main pot, vacuum pump, hydraulic pressure and electrical control system. Many customers who purchase our Tianfu emulsifying machine will ask about our emulsifying machine maintenance methods. The following are some simple and commonly used emulsifying machine maintenance methods that we have classified. Let's learn about them together!

1, after the end of the emulsion, the emulsion machine must be clean and clean, so that both adhere to the working efficiency of the stator and rotor can play a role in maintaining the emulsion secret seal. If necessary, a cleaning cycle of the device is designed to be installed near the periphery.

2. After the vacuum emulsifier confirms that the machine seal cooling water is connected, start the motor, and repeatedly request that the motor steering should be different from the steering mark of the main shaft before it can operate. Reverse rotation is strictly prohibited!

3, the operation of the shaft found that there is a liquid leakage phenomenon, it is necessary to adjust the pressure of the machine seal after the shutdown.

4. According to the different media used by users, the import and export filters must be cleaned regularly so as not to reduce the amount of feed and affect the consumption efficiency. The materials entering the working cavity must be fluid, and dry powder materials and agglomerates are not allowed to enter the machine directly, otherwise, the machine will be stuffy and the emulsifying machine will be damaged.

5, it is strictly prohibited to metal chips or hard and difficult to break debris into the emulsifier working cavity, so as to avoid the formation of the work of the stator, rotor and equipment to destroy the damage.

6. Before making the emulsifying machine, the corresponding safe consumption operation procedures should be formulated to ensure the safety of operators and equipment. In the electrical control system, users should set up a safe maintenance system, and have a good and reliable electrical motor grounding installation.

7, the vacuum emulsifier need to regularly check the stator, rotor, found that the wear is too large, should be timely change the corresponding parts to ensure the dispersion, emulsification effect.

8, in the use of the emulsifier, the liquid material must be continuously input or adhere to a certain amount in the container. Should prevent the empty machine operation, so as to avoid the material in the work of high temperature or crystallization solidification and damage to the equipment!

9, vacuum emulsifying machine in the process of operation in the event of abnormal sound or other problems, should immediately stop the inspection, to be removed after the operation. The working chamber and stator and rotor shall be cleaned after shutdown.