Trial operation can improve the service life of vacuum emulsifying machine

Release time:

2022-11-28

Due to the newly manufactured or overhauled vacuum emulsifying machine, the surfaces of various new mating parts have microscopic uneven processing marks. If people are put into load operation without running-in, the uneven friction surface of the parts will be quickly damaged, which will greatly increase the wear of the parts, even cause the parts to be stuck and damaged, and shorten the service life, in order to reduce the damage, we need to take the correct trial operation of the equipment before the equipment is put into production.

Trial operation can improve the service life of vacuum emulsifying machine

Due to new factory or overhaulvacuum emulsifying machine, the surfaces of all kinds of new mating parts have microscopic uneven processing marks. If people put into load operation without running-in, the uneven friction surface of the parts will be quickly damaged, which will greatly increase the wear amount of the parts, even cause the parts to be stuck and damaged, and shorten the service life. In order to reduce the damage, we need to take correct trial operation on the equipment before it is officially put into production and use.

The trial operation of the vacuum emulsifying machine should be blank and light load work for a certain period of time, so that the machine can get a preliminary running-in; at the same time, strengthen the inspection, maintenance and adjustment of the technical status of the machine during this period.

The determination of the commissioning procedure depends on a number of factors: namely, the material of the part, the quality of manufacture, the size of the load, the relative speed of movement, the duration due under the load and speed of movement, the quality of the lubricating material used, etc. The main is the unit pressure, the relative movement speed of the running-in piece and the duration of the movement under the load.

Various machines are properly coordinated according to the above factors to be considered, and the manufacturer has specified the commissioning procedures for the machine. In the transportation of the machine after leaving the factory, there are often problems such as missing parts, loose fasteners, lack of lubricating oil and even imbalance due to other reasons, which can be found and corrected in the test run. Therefore, the test run should also carefully check the status of the components, timely troubleshooting, so that the machine from damage.

Related News

Application of Micro-emulsification Technology

In the current variety of energy, crude oil plays an important role, accounting for about 40% of the world's energy

2024-09-23

Working principle of emulsifying and dispersing homogenizer

The stator and rotor are designed according to the principle of fluid mechanics under the high-speed drive of the motor.

2024-09-30

What are the emulsifying machine maintenance methods

Tianfu 2024 Exhibition

2024-09-30

Introduction of filling and sealing machine performance

Filling and sealing machine adopts closed and semi-closed filling paste and liquid, sealing without leakage, filling weight and capacity consistency is good, filling, sealing and printing are completed at one time, and it is suitable for product packaging in the fields of medicine, daily chemical, food and chemical industry. Such as: Piyanping, ointment, hair dye, toothpaste, shoe polish, adhesive, AB glue, epoxy glue, neoprene and other materials filling and sealing. It is an ideal, practical and economical filling equipment for pharmaceutical, daily chemical, fine chemical and other industries. Application performance: 1. The transmission part is closed below the platform, which is safe, reliable and pollution-free; 2. The filling and sealing part is installed above the platform and semi-closed without static.

2018-09-14

Industry Development of Emulsion Machine

Emulsification machine is through the high-speed rotation of the homogenization head connected with the engine to shear, disperse and impact the material. In this way, the material will become more delicate and promote the melting of oil and water. Widely used in cosmetics, shower gel, sunscreen, and many other cream products are used in the emulsifying machine. Sauce, juice, etc. in the food industry. Ointments in the pharmaceutical industry. Petroleum chemical industry, paint ink, etc. will use the emulsifying machine. Industry development: 1. China's emulsifying machine tool has become one of the strengths of China's processing industry. Among them, the vacuum homogenization emulsifying machine and the high-shear emulsifying machine are all advanced in the world in the past few years.

2018-09-17

What areas are filling and sealing machines suitable?

Filling and sealing machine adopts closed and semi-closed filling paste and liquid, sealing without leakage, filling weight and capacity consistency is good, filling, sealing and printing are completed at one time, and it is suitable for product packaging in the fields of medicine, daily chemical, food and chemical industry. Such as: Piyanping, ointment, hair dye, toothpaste, shoe polish, adhesive, AB glue, epoxy glue, neoprene and other materials filling and sealing. It is an ideal, practical and economical filling equipment for pharmaceutical, daily chemical, fine chemical and other industries. Experimental studies have shown that for the blade zone, regardless of the type of slurry, when the blade diameter is constant, the maximum shear rate and the average shear rate increase with the increase of speed.

2018-09-17

Share