The difference between emulsifying machine and mixer and the operation of vacuum emulsifying machine

Both the emulsifier and the mixer have the function of mixing, but the structure and scope of application are different. Below we take a look!

The rotating stator of the emulsifying machine is generally made of high-strength hard alloy, which is similar to the shearing movement of two grinding discs and is more wear-resistant. The emulsifying effect can be achieved by adjusting the gap. The advantage is that the mixing effect is good, the appropriate emulsifying head can be applied to a variety of working conditions, widely used, suitable for a variety of different industries; the disadvantage is that the output is low, and the mixing effect is poor for hard particle materials and high viscosity materials.

The high-speed mixer is mainly used in simple mixing, such as the material itself does not need to be refined, as long as the simple mixing can be; the advantage is the traditional mixing method, the output is large, the application is more extensive; the disadvantage is that there is no shear refinement effect on the material, only simple mixing.

vacuum emulsifying machine

The operation of the air compressor can make the compressed air flow and dispersion, so that the mechanical rotation of the air compressor is intensified, thereby reducing the life of the cylinder. From a practical point of view, no matter under which operating conditions, the principle of gasification is that oil vapor or petroleum gas can obtain a higher temperature. The principle of electrification can be used in both mechanical movement and balance of movement. Oil absorption and cooling are caused by the use of exhaust gas without special exclusion, so it will not have a serious impact on the stability and cost of combustion.

The advantage of homogeneous emulsifying machine is high efficiency, and the middle and high-end products are all from the vacuum environmental protection production line, and have a wide range of market application prospects. At present, the emulsion vacuum emulsifying machine is mainly used in water, steam, cocoa and other substances; foam and terrazzo and other natural stone. the product is white and rhythmic, with low emulsifier, which effectively reduces the voc concentration, ensures the mixing of moisture and water vapor under standard conditions, and achieves the purpose of reducing the voc concentration.