Vacuum emulsification machine complete vacuum emulsification process

vacuum emulsifying machineIntroduction of complete vacuum emulsification process:

The vacuum emulsifying machine is composed of a tank body, a stirring device and an intermittent high-shear emulsifying machine or a high-shear emulsifying machine. Its stirrer is composed of a blade-folding paddle stirrer in the middle and a frame stirrer capable of mixing high viscosity. A scraper for scraping the wall of the frame stirrer is installed around the frame stirrer. The scraper is used to continuously generate a new interface between the inner wall of the container and the material without leaving any dead angle.
1. In the process of work, under the action of the centrifugal force generated by the rotating rotor, the material in the container is axially sucked into the working cavity from the feeding area of the working head.
2. The material is thrown into the narrow and precise gap between the stator and the rotor from the radial direction by the strong centrifugal force. At the same time by centrifugal extrusion, impact and other forces, so that the initial dispersion of the material emulsification.
3. The linear velocity of at least 14 m/s is generated at the outer end of the high-speed rotating rotor, and strong mechanical and hydraulic shearing, liquid layer friction and impact tearing are formed, so that the materials can be fully dispersed, emulsified, homogenized and sprayed out from the radial direction at the same time. After a treatment or cycle after the completion of the dispersion emulsification, homogenization process.
4. After the vacuum emulsifier completes the first group of work, the material enters the second stator and rotor working area under the action of the centrifugal force of the second group of rotors. Once again, after the stator and rotor multi-layer, dense and uniform shearing action, it is ejected from the radial direction, and under the action of the centrifugal force of the third group of rotors, it enters the third group of stator and rotor working areas to complete the technological processes of dispersion, emulsification and homogenization. After the three groups of stator and rotor of the vacuum emulsifying machine are processed in turn, the material is uniformly processed in a short time, and the process of dispersion, emulsification and homogenization is completed.