Structural characteristics of vacuum making machine

Release time:

2022-11-05

Vacuum paste machine is widely used in toothpaste, cosmetics, food, chemical and other industries viscous paste manufacturing. The whole set of equipment is equipped with paste making machine, premix pot, glue pot, powder hopper, colloid pump and operation platform. The following Tianfu introduces the structural characteristics of the vacuum making machine, specifically as follows:(1) The cylinder is made of three layers, both inside and outside are made of stainless steel, and the positive pressure resistance is 0.2MPa, the negative pressure resistance is -0.1MPa, the jacket is used for heating or cooling, and the positive pressure resistance is 0.3Mpa.

Structural characteristics of vacuum making machine

Vacuumpaste making machineWidely used in toothpaste, cosmetics, food, chemical and other industries viscous paste manufacturing. The whole set of equipment is equipped with paste making machine, premix pot, glue pot, powder hopper, colloid pump and operation platform. The following Tianfu is about the structural characteristics of the vacuum machine, as follows:

(1) The cylinder is made of three layers, both inside and outside are made of stainless steel, with positive pressure resistance of 0.2MPa and negative pressure resistance of -0.1MPa. The jacket is used for heating or cooling, with positive pressure resistance of 0.3Mpa.

(2) The scraper stirring is a large wall-sticking scraper and a central scraper rotating in the forward and reverse directions, and the rotating speeds are 6RPM and 12RPM respectively. When stirring, the materials can be scraped off the cylinder wall, the temperature transmission is uniform and sufficient, and the effect of turning up and down is formed.

(3) The high-speed homogenizer is placed at the bottom of the paste making pot with a rotating speed of 1450RPM and a gap of 1-2mm between the inner and outer rotors. After the powder is sucked from the bottom, it is sprayed to the top through the homogenizer, thus achieving the effect of making the paste delicate.

(4) The vacuum pump adopts a water-sealed two-stage vacuum pump, and a buffer tank is equipped between it and the paste making pot to isolate the materials accidentally brought out.

(5) The hydraulic lifting mechanism is a double-column double-hydraulic differential, which is convenient for the maintenance of the fittings in the pot and the inspection of the paste in the pot.

(6) Circulating water is used for jacket cooling, the water pressure is controlled below 0.3Mpa, and the temperature is set by the control system.

(7) The discharge port is located at the bottom of the paste making pot, and a colloid pump with a flow rate greater than 100L/min is used for discharge.

Related News

Application of Micro-emulsification Technology

In the current variety of energy, crude oil plays an important role, accounting for about 40% of the world's energy

2024-09-23

Working principle of emulsifying and dispersing homogenizer

The stator and rotor are designed according to the principle of fluid mechanics under the high-speed drive of the motor.

2024-09-30

What are the emulsifying machine maintenance methods

Tianfu 2024 Exhibition

2024-09-30

Introduction of filling and sealing machine performance

Filling and sealing machine adopts closed and semi-closed filling paste and liquid, sealing without leakage, filling weight and capacity consistency is good, filling, sealing and printing are completed at one time, and it is suitable for product packaging in the fields of medicine, daily chemical, food and chemical industry. Such as: Piyanping, ointment, hair dye, toothpaste, shoe polish, adhesive, AB glue, epoxy glue, neoprene and other materials filling and sealing. It is an ideal, practical and economical filling equipment for pharmaceutical, daily chemical, fine chemical and other industries. Application performance: 1. The transmission part is closed below the platform, which is safe, reliable and pollution-free; 2. The filling and sealing part is installed above the platform and semi-closed without static.

2018-09-14

Industry Development of Emulsion Machine

Emulsification machine is through the high-speed rotation of the homogenization head connected with the engine to shear, disperse and impact the material. In this way, the material will become more delicate and promote the melting of oil and water. Widely used in cosmetics, shower gel, sunscreen, and many other cream products are used in the emulsifying machine. Sauce, juice, etc. in the food industry. Ointments in the pharmaceutical industry. Petroleum chemical industry, paint ink, etc. will use the emulsifying machine. Industry development: 1. China's emulsifying machine tool has become one of the strengths of China's processing industry. Among them, the vacuum homogenization emulsifying machine and the high-shear emulsifying machine are all advanced in the world in the past few years.

2018-09-17

What areas are filling and sealing machines suitable?

Filling and sealing machine adopts closed and semi-closed filling paste and liquid, sealing without leakage, filling weight and capacity consistency is good, filling, sealing and printing are completed at one time, and it is suitable for product packaging in the fields of medicine, daily chemical, food and chemical industry. Such as: Piyanping, ointment, hair dye, toothpaste, shoe polish, adhesive, AB glue, epoxy glue, neoprene and other materials filling and sealing. It is an ideal, practical and economical filling equipment for pharmaceutical, daily chemical, fine chemical and other industries. Experimental studies have shown that for the blade zone, regardless of the type of slurry, when the blade diameter is constant, the maximum shear rate and the average shear rate increase with the increase of speed.

2018-09-17

Share