Matters needing attention in the operation of emulsifying machine

Emulsion machineIt is an efficient, rapid, and uniform distribution of one or more phases into another continuous phase, which is usually immiscible with each other. Due to the high tangent speed generated by the high-speed rotation of the sub-component and the strong kinetic energy brought by the high-frequency mechanical effect, the materials are subjected to strong mechanical and hydraulic shearing, centrifugal extrusion, liquid layer friction, impact tearing and turbulence in the narrow gap between the stator and the rotor, so that the immiscible solid phase, liquid phase and gas phase are under the combined action of corresponding mature processes and appropriate amounts of additives, instantaneous uniform fine dispersion emulsification, after high frequency cycle, finally get stable high quality products. The following Tianfu will introduce the matters needing attention in the operation of the emulsifying machine.

1. For example, the process working chamber can be equipped with a thermal insulation layer for cooling or heating of materials. When the emulsifying machine equipment is turned on, the cooling liquid or heat transfer oil shall be connected first.

2. When the colloidal emulsifying machine is used in a flammable and explosive working environment, the corresponding level of explosion-proof motor must be selected.

3. After the production is completed, the emulsifying machine equipment must be cleaned, so as to maintain the working efficiency of the stator and rotor and play a role in protecting the machine seal. If necessary, a cleaning cycle device is designed and installed near the periphery.

4, emulsifying machine equipment need to regularly check the stator, rotor, found that wear is too large, should be timely replacement of the corresponding parts to ensure the dispersion, emulsification effect.

5. If liquid leakage is found at the shaft of the emulsifying machine during operation, the pressure of the machine seal must be adjusted after shutdown.

Before using the emulsifying machine equipment, the corresponding safety production operation procedures should be formulated to ensure the safety of operators and equipment. In the electrical control system, users should set up a safety protection system and have a good and reliable electrical motor grounding device.