Preparation before and after using the vacuum emulsifying machine
Release time:
2022-09-22
The vacuum emulsifying machine has complete functions, not only can realize rapid homogenization emulsification, heating and cooling, but also has the functions of vacuum degassing and discharging. In order to maintain the working efficiency of the emulsifier and the quality of the products, and to extend the service life of the emulsifier, the emulsifier must be operated in a standardized manner. The preparation before and after using the vacuum emulsifying machine is very important. The following Tianfu will specifically talk about these matters needing attention.
vacuum emulsifying machineComplete functions, not only to achieve rapid homogenization emulsification, heating, cooling, but also with vacuum degassing, discharging and other functions. In order to maintain the working efficiency of the emulsifier and the quality of the products, and to extend the service life of the emulsifier, the emulsifier must be operated in a standardized manner. The preparation before and after using the vacuum emulsifying machine is very important. The following Tianfu will specifically talk about these matters needing attention.
Preparation of 1. before use
First of all, check whether there are potential safety hazards in the vacuum emulsifying machine and the surrounding working environment, such as whether the appearance of pipelines and equipment is complete or not, whether there is water leakage on the ground, etc. Then control the production process and equipment operation and use procedures strictly check item by item to ensure that the conditions required by each procedure are met, and strict and careless. Check the conditions of lubricating oil and coolant, replace the turbid lubricating oil or coolant, ensure that the liquid level is between the specified amount, check whether the power supply is normal, and there is a * display after power on, etc.

Check in 2. use
In normal production, it is easy for the operator to ignore the detection of the operating condition of the equipment. Therefore, the technical personnel of the general regular emulsifying machine manufacturer will emphasize that the operator should pay attention to the operation of the equipment to avoid improper use and detect the working condition at any time to avoid equipment damage and material loss due to illegal operation. The sequence of starting and feeding, the selection of cleaning methods and cleaning supplies, the feeding method, the environmental treatment during the working process, etc., are all prone to equipment damage or safety problems due to carelessness. In addition, during the working process, If abnormal phenomena such as abnormal noise, peculiar smell, sudden vibration, etc. occur, the operator should immediately check and properly handle them
Reset after 3. use
The work after the production of the vacuum emulsifier is also very important and easy to be ignored. Many users in the production, although there is a thorough cleaning of the equipment as required, but the operator may forget the reset step, is also easy to cause damage to the equipment or leave a security risk.
1. Empty the liquid and gas in each process pipeline. If automatic and semi-automatic equipment for pipeline transportation is adopted, the materials in the pipeline shall be handled according to regulations;
2. Clean the sundries in the buffer tank and keep the buffer tank clean;
3. Clean up the vacuum pump and check valve of the vacuum system (if it is a water ring vacuum pump, pay attention to the inching inspection before the next operation. If it is rusted, it must be manually removed before power on);
4. All mechanical parts shall be reset to normal state, and the inner pot and jacket shall keep the vent valve normally open;
5. Turn off the main power supply after turning off the power supply of each branch.
Related News
Application of Micro-emulsification Technology
2024-09-23
Working principle of emulsifying and dispersing homogenizer
2024-09-30
Introduction of filling and sealing machine performance
2018-09-14
Industry Development of Emulsion Machine
2018-09-17
What areas are filling and sealing machines suitable?
2018-09-17
Share