Operation precautions of vacuum emulsifying machine
Release time:
2023-08-26
The precise coordination of the rotor and stator of the vacuum emulsifying machine, the working head claw structure, the two-way suction material, and the high shearing efficiency. The shearing head is composed of a rotor and a stator. The rotor has strong kinetic energy due to its high linear speed and high-frequency mechanical effects, so that the material is subjected to shearing, centrifugal extrusion, liquid layer friction, and impact in the precision gap of the stator. Comprehensive effects such as tearing and turbulence, so as to achieve the effects of dispersion, grinding and emulsification. This machine is widely used in pharmaceutical, cosmetics, food, paint, plastic resin, printing and dyeing, ink, asphalt and other industries.
vacuum emulsifying machineThe precision fit of the rotor and stator, the working head claw type structure, two-way suction, high shearing efficiency. The shearing head is composed of a rotor and a stator. The rotor has strong kinetic energy due to its high linear speed and high-frequency mechanical effects, so that the material is subjected to shearing, centrifugal extrusion, liquid layer friction, and impact in the precision gap of the stator. Comprehensive effects such as tearing and turbulence, so as to achieve the effects of dispersion, grinding and emulsification. This machine is widely used in pharmaceutical, cosmetics, food, paint, plastic resin, printing and dyeing, ink, asphalt and other industries.

The following Tianfu simple to share with you the operation of vacuum emulsifying machine precautions, as follows:
1. When the power is turned on, we need to jog the homogenizing head of the rotating emulsifier and observe the steering of the homogenizing head. Looking from top to bottom, counterclockwise rotation indicates that the power connection is correct. If it is clockwise rotation, it indicates that the power connection is reversed and the power supply should be reconnected;
2, the homogenization head of the emulsifier in the absence of medium, it is strictly prohibited to idle, in order to prevent heat, burn out the bearing and seal deformation;
3, first to turn on the power supply, the ground wire of the emulsifying machine must be connected reliably to ensure the safety of electricity. Otherwise prone to disaster;
4. When vacuuming, be sure to fill the vacuum pump water tank with water to prevent the vacuum pump from idling. When starting the vacuum pump, check whether the vacuum pipes are sealed to prevent air leakage and avoid insufficient vacuum;
When cleaning the emulsifying machine, be sure to cut off all power supply to avoid accidents.
6. When the material needs to be heated, first ensure that there is a heating medium in the emulsifier jacket to prevent dry burning and damage to the heating tube;
7. During the operation of the emulsifying machine, it is strictly forbidden to extend all parts of the body into the pot to prevent accidents;
8. The vacuum pump is strictly prohibited to open when the lid is not closed. If there are special needs, the start cannot exceed three minutes to prevent damage;
9. In the process of operating the emulsifying machine, if there is abnormal noise, the power must be turned off immediately, and the operation can only be carried out after the cause is found out;
10. Before closing the vacuum pump, the ball valve in front of the vacuum pump should be closed to prevent dew. When the lid needs to be raised, the air filter must be opened first to let the pot body become normal pressure, and then the lifting operation should be carried out;
Related News
Application of Micro-emulsification Technology
2024-09-23
Working principle of emulsifying and dispersing homogenizer
2024-09-30
Introduction of filling and sealing machine performance
2018-09-14
Industry Development of Emulsion Machine
2018-09-17
What areas are filling and sealing machines suitable?
2018-09-17
Share